Shutting Down - GBC VOYAGER Instruction Manual

Application
Top web views
Top web views are provided so that you may
receive a visual image of the completed web outline.
The web views are separated into three views; Feeder,
Laminator, and Exit.
Feeder
Laminator
Exit
Page 1 - 42
Voyager Operation and Maintenance Manual

5.8 Shutting down

At the end of the run, take the following
steps:
a. Press LAMINATOR STOP.
b. Raise the pull roller.
c. Separate the main rollers.
o
d. Cool heater to 180 F.
e. Turn MAIN POWER to " OFF ".
f. Turn off the compressed air at the Air Pressure
Regulator.
Taking air pressure off the laminating rollers when
they are not in use, prevents the development of a flat
spot on the counter-pressure roller. With no pressure in
the pneumatic cylinders, gravity holds the rollers apart.
© GBC Films Group April 2000