Table of Contents
Advertisement
Voyager Operation and Maintenance Manual
12. UNWIND BRAKE ON/ OFF: Engages air or
disengages air to the pneumatic brake to the unwind shaft.
See image below.
13. PRESSURE ADJUST: Adjusts the amount of air
pressure supplied to the pneumatic brake.
Pressure adjust
Clutch ON/ OFF
Unwind shaft controls
14. PRESSURE GAUGE: Indicates the amount of air
pressure being supplied to the pneumatic brake. See image
above.
15. FILM SLITTER PRESSURE ADJUST: Adjusts
the amount of pressure applied to the blade pressed against
the roll of film. The closer to the roll of film the more
pressure applied.
© GBC Films Group April 2000
4.2 Feeder controls
1 TABLE UP: Raises the sheet table while pressed. When
released, the sheet table stops. See image below.
2. TABLE DOWN: When pressed, starts the sheet table
to lower. Press again to stop the travel of the sheet table.
Pressure guage
3. EMERGENCY STOP: When pressed, stops the
machine from operation, raises the heating roller. See
image above
4. BAFFLE HANDLES: Adjusts the amount of air flow
in the conveyor.
Table Up
Table Down
Feeder controls
Operations
E-STOP
Page 1 - 21
Advertisement
Table of Contents
