Table of Contents
Advertisement
Voyager Operation and Maintenance Manual
5.2 Feeding head unit
At this point you should have loaded sheets onto
the table. Making adjustments to the feeding head unit
are quick and easy if the steps are followed precisely.
To load the sheets, take the following steps:
a. Slide the feeding head unit forward toward the sheet
stack.
b. Stop when the sheet stack tabs make slight contact
with the back of the sheets.
© GBC Films Group April 2000
c. Press laminator start.
INFORMATION
Do not turn the VACUUM PUMP on.
You only want the feeding head
unit to move, not feed sheets.
d. Set laminator speed to 15.
e. Use the feeding height adjust to set the feeding head
unit height.
Application
Page 1 - 29
Advertisement
Table of Contents
