Table of Contents
Advertisement
Voyager Operation and Maintenance Manual
s. Guide the web through the snapping rollers.
t. Pull the web taunt and lower the pull roller.
u. Turn the knife adjust wheel so that approximately
1/2 in. of the blade is over the web.
© GBC Films Group April 2000
v. Close the pull roller safety shield.
w. Press LAMINATOR START.
x. Turn KNIFE & SNAP to " KNIFE & SNAP "
position.
y. Adjust the knife cutting position so that the cut is at
the edge of the top sheet overlap.
Application
Page 1 - 39
Advertisement
Table of Contents
