GBC VOYAGER Instruction Manual page 10

Warranty
2. Damage to the machine caused by lifting, tilting and/ or
any attempt to position the machine other than rolling
on the installed castors on evensurfaces.
3. Improper use of the machine.
4. Damage due from unqualified person(s) servicing the
machine.
Qualified
• Any engineer that has experience with electrical
and mechanical design of lamination equipment. The
engineers should be fully aware of all aspects of safety
with regards to lamination equipment.
• Any commissioning or service engineer must be
of competent nature, trained and qualified to GBC Pro-
Tech standards to fulfill that job. This person will have
completed and passed the full service training course from
GBC Pro-Tech.
• Any GBC Technician, GBC Specialist, and / or
GBC Pro-Tech Technician that has been through the GBC
Pro-Tech service training course.
Page 1 - 8
Voyager Operation and Maintenance Manual
© GBC Films Group April 2000