Table of Contents
Advertisement
Voyager Operation and Maintenance Manual
Other controls on the laminator
1. MAIN POWER ON/ OFF: Engages power to the
machine or removes power to the machine.
OFF
2. AIR PRESSURE REGULATOR: Adjusts the
amount of incoming air to the machine.
3. BOW ROLLER ADJUST: Increases film tension
or decreases film tension when turned.
© GBC Films Group April 2000
O N
3. LAP CONTROL KNOB/ DIAL INDICATOR:
Adjusts the amount of overlap per sheet. The indicator
shows a reference point.
4. KNIFE TIMING ADJUST: Changes the timing of
the knife when turned.
5. DECURLING ANGLE ADJUST: when turned can
either add a curling angle or decrease the curling angle of
the web.
Operations
Page 1 - 19
Advertisement
Table of Contents
