Table of Contents
Advertisement
Operations
9. NIP UP/ DOWN: When pressed and illuminates, the
nip roller is in the down position. When pressed and the
light extinguishes, the nip roller is in the up position.
10. VACUUM PUMP selector: Engages or disengages
the vacuum pump.
11. LAMINATOR SPEED dial: Adjusts the machine
speed. Automatically adjusts the feeder to compensate
for the laminator speed change.
12. SHEET EXIT BLOWER dial: Adjusts the amount
of air flow comes out the sheet blower valve.
Figure 4.1.1 Control panel - Laminator
1
11
Page 1 - 18
2
3
4
12
13
Voyager Operation and Maintenance Manual
13. SHEET COUNTER: Can be selected to display
total sheets or sheets per minute. Total sheets can be reset
back to zero.
14. HOUR METER: Keeps track of the total amount
of operating time on your machine.
15. NIP PRESSURE GAUGE: Indicates the amount
of pressure presented at the main roller nip.
16. NIP PRESSURE ADJUST dial: Adjusts the
amount of pressure presented at the main roller nip.
5
6
7
14
© GBC Films Group April 2000
8
9
10
15
16
Advertisement
Table of Contents
