Table of Contents
Advertisement
Introduction
Film Slitter
This device cuts the film on-line, to the width
needed for a finished product. The unused film remains
on the core for ease of disposal.
Bow Roller
This roller helps to remove wrinkles from the film
and increases the dwell time of film on the heated chrome
roller. Increased dwell time permits operation at a lower
roller temperature.
Breaker Bar Assembly
This assembly decurls the laminated web as the
web passes through it. The breaker bar can be rotated to
produce the desired degree of break in the paper.
Page 1 - 12
Voyager Operation and Maintenance Manual
Pull Rollers
This pair of rollers helps to draw the film through
the laminator, maintaining the web tension across the decurl
unit.
Snapping Rollers
This pair of rollers snaps the film enabling the
images to be separated after the web has been knicked.
Knicker Assembly
Places a knick into the web at the set interval.
This allows for the snapping rollers to separate the web.
© GBC Films Group April 2000
Advertisement
Table of Contents
