Table of Contents
Advertisement
Voyager Operation and Maintenance Manual
Trouble
4. Film is wrinkling
5. Film Quality & Adhesion
© GBC Films Group April 2000
Cause / Action
a. Bow roller is out of adjustment
b. brake tension is too loose
c. Chrome roller is dirty
d. Heat is to high
e. Extremely poor film quality
A heat roller that has recently been in use
may still be hot eneough to burn you!
a. Heat is not properly set for film type
Too High - film melts, stretches, bubbles
Too Low - silvering, milky, no adhesion
b. Bow Roller is not adjusted correctly, allowing an air pocket
between film and roller
c. Film has absorbed moisture or is aged
d. Dyne level too low for product
e. Dirty or damaged heat or nip rollers
Troubleshooting
WARNING
Page 1 - 47
Advertisement
Table of Contents
