New Holland Workmaster 50 Operator's Manual page 80

Roll Over Protective Structure (ROPS) Fold-
ing Procedure
To fold the ROPS into the "DOWN" position, remove re-
taining ring (1), from the pin (2). Remove pin from the
latching bracket, on both sides of the ROPS.
Rotate top part of ROPS fully downward until brackets
contact ROPS uprights. Reinstall pin (2)into lower retain-
ing hole (3). Re-attach the retaining ring (1).
4 - OPERATING INSTRUCTIONS
4-8
2
86065629N
3
86065630N