Steering Oil Reservoir Level - New Holland Workmaster 50 Operator's Manual

Hide thumbs Also See for Workmaster 50:
Table of Contents

Advertisement

Peak power operation, followed by a rapid reduction
in power requirement and engine speed, may cause
the coolant to boil and be discharged from the radiator
overflow tube. Normally, this loss of coolant is small and
of little consequence, but repeated loss can significantly
lower the coolant level and necessitate topping off. An
additional water tank is fitted fill the coolant in the tank
by removing tank cap (1).
NOTICE: Never use tractor without radiator cap (1) as this will result into boiling and hence evaporation of the engine
coolant.

Steering oil reservoir level

1. Check the oil level through the transparent reservoir
(1). .
2. If level is low, add NEW HOLLAND AMBRA MULTI G
134™ HYDRAULIC TRANSMISSION OIL as required.
3. Make sure that the breather in the cap is completely
clean.
Oil capacity 2.0 l (0.5 US gal).
7 - MAINTENANCE
7-14
1
GNIL14TR00517AA
1
GNIL14TR00518AA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workmaster 60Workmaster 70

Table of Contents