New Holland Workmaster 50 Operator's Manual page 76

Starting in warm weather or when the engine
is hot
1. Place the hand throttle lever (1) in the halfway position.
2. Place transmission shuttle shift lever (2) in the neutral
position.
3. Place both gear levers (3) in the neutral position
4. Depress the clutch pedal (4).
5. Turn the key- switch (4) fully clockwise to the "START"
(3) position to operate the starting motor. Do not op-
erate the starter motor for more than 10 s
6. After the engine starts, allow the key to return to the
"RUN" position.
7. Return the hand throttle lever to the idle position and
check that all warning lights are off and gauge read-
ings are normal.
4 - OPERATING INSTRUCTIONS
4-4
7
GNIL14TR00512AA
8
GNIL14TR00785AA
9
86090118N
10
GNIL14TR00558AA