New Holland Workmaster 50 Operator's Manual page 35

2 - SAFETY INFORMATION
(B) ATTENTION:
Do not tow tractor unless all transmission levers
•
are in neutral.
To prevent cab damage
•
• Place tractor hydraulic system in position control
before attaching implement.
• Raise the implement slowly and ensure 4" (10cm)
cab to implement clearance.
• To protect the engine and hydraulic components:
1) Idle engine for one minute before shutdown
•
after full load operation.
• 2) Do not exceed half throttle for first five minutes
of operation.
Do not use creeper gears for high draft loads.
•
With units equipped with creeper gears. Do not
•
stop engine with transmission in "creeper gear" to
avoid starting difficulties.
See Operators Manual for complete instructions.
•
Quantity: 1
English Part Number: 82030429
17
82030429N
2-19