New Holland Workmaster 50 Operator's Manual page 51

Central display
The central Liquid Crystal Display (LCD) provides the op-
erator with a range of information
1. Front or rear Power Take-Off (PTO) speed
Front or rear lift position
Slip
Data displayed by pressing and releasing the button
ENTER, see figure 6
2. Tractor direction
3. Speed of the vehicle in Km/h or MPH
4. Tractor hour meter
5. Kilometers or miles travelled
Area worked
Area worked per hour
Battery voltage
Data displayed by pressing the arrow buttons up or
down (B), see 6
When necessary, warning and error messages
Programming menu (see specific chapter)
3 - CONTROLS AND INSTRUMENTS
3-7
5
DCAPLT5NE005S3F
6
GNIL14TR00512AA