4. Install cleaned outer element or a new outer element
by gently pushing the outer element inside the housing
while rotating the filter in a clockwise direction.
5. While installing the cover make sure that the dust cup
(1) is facing downward.
6. Check all the air intake hoses for damage. Replace the
damaged hoses.
7. Check air intake hoses clamps for tightness, tighten
clamps if needed.
Inspection of inner element
1. Only remove the inner element for replacement. The
inner element should never be cleaned
2. The inner element should be replaced when replacing
outer element or every 1200 h, hours whichever is ear-
lier.
3. Follow the similar instructions of removing and fitting
outer element from casing to replace the inner element.
7 - MAINTENANCE
7-25
7
GNIL14TR00501AA.PNG