New Holland Workmaster 50 Operator's Manual page 89

Power-Take Off (PTO) engagement
1. To engage the PTO, press the clutch pedal, and pull
lever (1) towards the operator's seat and then push
forward until handle engages the notch in the quad-
rant.
2. The PTO system is independent of the tractor ground
speed, and the following operations can be performed.
• The tractor ground travel can be stopped without stop-
ping the PTO.
• The PTO can be stopped without stopping the tractor
ground travel.
NOTE: If the operator leaves the seat without disengaging
the PTO, an alarm will sound.
Power-Take Off (PTO) disengagement
1. Pull the PTO lever (1) rearward to disengage the PTO.
The PTO will stop automatically when disengaged due to
a internal frictional brake.
6 - WORKING OPERATIONS
4
86090124N
5
86090124N
6-5