New Holland Workmaster 50 Operator's Manual page 36

(8) Location: Inside of the right-hand fender.
WARNING
Pull only from drawbar. Pulling from any other
•
point can cause rear overturn.
Do not operate with unshielded PTO.
•
• Disengage PTO and stop engine before servicing
tractor or implements or attaching or detaching
implements.
• Position drawbar at 14" from end of PTO shaft to
drawbar hole for 540 and 16" for 1000 PTO RPM.
When towing use a safety chain.
•
• FAILURE TO FOLLOW ANY OF THE INSTRUCTIONS
ABOVE CAN CAUSE SERIOUS INJURY TO THE
OPERATOR OR OTHER PERSONS.
Quantity: 1
English Part Number: 86532904
(9) Location: On top of the rear PTO guard.
2 - SAFETY INFORMATION
(9)
2-20
18
GNIL14TR00573AA
19
86532904N
20
GNIL14TR00579AA