Demounting, Return, Cleaning And Disposal; Demounting; Return; Cleaning - promesstec UREG 200 User Manual

9. Demounting, Return, Cleaning and Disposal

9.1 Demounting

Residual media in dismantled devices can endanger persons, the
environment and equipment. Sufficient precautionary measures
must be taken.
There is a risk of burns. Allow the sensor to cool down sufficiently
before removing it. During dismounting, there is a risk of
dangerously hot media escaping.
Only dismantle the resistance thermometer when it is
depressurized.

9.2 Return

Use the original packaging or equivalent to return the device.
As protection against damage can be used e.g. antistatic foil,
insulating material, labeling as sensitive measuring device.

9.3 Cleaning

Disconnect the electrical connection before cleaning the sensor.
Clean the device with a damp cloth.
Do not allow the electrical connection to come into contact with
moisture.
Rinse or clean a dismantled instrument before returning it to protect
people and the environment from hazards caused by residual me-
dium adhering to the instrument.
Residual media in dismantled devices can endanger persons, the
environment and equipment. Take adequate precautions.

9.4 Disposal

Dispose of device components and packaging materials in an
environmentally friendly manner in accordance with the country-
specific waste treatment and disposal regulations.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
85