Input 1 (In1) - promesstec UREG 200 User Manual

(21) Manual regulation
(22) Display Mode
(23) Restore factory setting
(24) DC Power supply for sensors

6.1 input 1 (IN1)

Press to enter the Setup Menu. Press
upper display shows the parameter symbol, the lower display shows the current
setting or value.
IN1: Select the sensor type for input 1.
range: (Thermocouple) J_TC, K_TC, T_TC, E_TC, B_TC,
R_ TC, S_TC, N_TC, L_TC
(RTD) PT.DN, PT.JS
(Linear) 4-20, 0-20, 0-1V, 0-5V, 1-5V, 0-10
Factory setting: K_TC at °C, J_TC at °F as a unit.
IN1U: Select the unit for input 1
range: °C, °F, PU
factory setting: °C
DP1: Select the number of decimal places
range: (At TC and RTD) NO.DP, 1-DP
(At linear) NO.DP, 1-DP, 2-DP, 3-DP
Factory setting: 1-DP
IN1L: Select LOW scaling for linear input 1.
Is hidden when TC or RTD sensors are on IN1.
IN1H: Select HIGH scaling for linear input 1.
Is hidden when TC or RTD sensors are on IN1.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
to select a parameter. The
E-Mail: office@promesstec.com I Internet: www.promesstec.com
43