Table of Contents
Advertisement
5.2 Installation
Create an assembly cut-out with the dimensions in picture. Remove the transparent
terminal covers and the mounting brackets. Place the controller in the mounting cut-
out and secure it with the mounting brackets. The terminal covers must be refitted to
the unit after installation.
Cutout/ Mounting
Please ensure that the inside of the mounting plate corresponds to
the operating temperature of the unit and that sufficient air can circu-
late to avoid overheating.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
25
Advertisement
Table of Contents
