Table of Contents
Advertisement
3. safety instructions
Further important safety instructions can be found in the individual
chapters.
3.1 Intended use of the product
The sensor is desiged and constructed exclusively for the intended use described
here and may only be used as follows. The technical specifications in these
operating instructions must be observed.
Improper handling or operation of the device unit outside the technical specifications
requires immediate decommissioning and inspection by the manufacturer. If the unit
is transported from a cold to a warm environment, condensation may cause the unit
to malfunction. Wait for the temperature of the appliance to adjust to the room
temperature before starting it up again. Claims of any kind are excluded due to
improper use.
3.2 Personnel qualification
Risk of injury due to inadequate qualification. Improper handling can
lead to considerable personal injury and damage to property.
The activities described in these operating instructions may only be
carried out by qualified personnel with the following qualifications.
Keep unqualified personnel away from the hazardous areas.
For installation and commissioning of the sensor, these persons must be familiar
with the applicable country-specific directives and standards and have the
appropriate qualificationions. They must have knowledge of measurement and
control technology be familiar with electrical circuits and be able to carry out the
work described and recognise possible dangers independently. Depending on the
conditions of use, other knowledge may also be required, e.g. about aggressive
media.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
7
Advertisement
Table of Contents
