Table of Contents
Advertisement
3.3 Special hazards
Observe the country- specific regulations (e.g. standards) and, in
the case of special applications, observe the applicable standards
and directives (e.g. for hazardous media such as Acetylene,
flammable or toxic substances as well as refrigeration plants and
compressors).
If the relevant regulations are not observed, serious personal
injury and damage to property may result!
Electrostatic discharge (ESD) protection is required. Proper use of
grounded work surfaces and personal wrist straps is required when
working with open circuit (printed circuit boards) to prevent damage
to sensitive electronic components from electrostatic discharge.
There is danger to life from electric current. There is a immediate risk
of death if live parts are touched. Installation and mounting of
electrical equipment may only be carried out by qualified electricans.
When operating with a defective power supply unit (e.g. short-circuit
from mains voltage to output voltage), life-threatening voltages can
result at the device.
Residual media in device that have been removed can be hazardous
to persons, that environment and equipment. Sufficiet precations
must be taken. This device must not be used in safety or emergency
stop devices. Incorrect applications of the device can lead to inuries.
In case of a fault, aggressive media at extreme temperatures and
under high pressure or vacuum may be present at the device.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
8
Advertisement
Table of Contents
