Table of Contents
Advertisement
The programming interface is used exclusively for offline
programming and test purposes. Never connect this port during
normal regular operation.
6. Programming the basic functions
The UREG200 has the option of selecting the
menu range with the "FUNC" parameter at the
beginning of programming. The Basic Menu
(FUNC = BASC) should be selected for simple
applications. The following functions are not
available in the basic menu: RAMP, SP2, PB2,
TI2, TD2, PL1, PL2, COMM, PROT, ADDR,
BAUD, DATA, PARI, STOP, AOFN, AOLO,
AOHI, IN2, IN2U, DP2, IN2L, IN2H, EIFN,
PVMD, FILT, SLEP, SPMD and SP2F.
These functions are described in chapter 4.
The basic menu functions are:
(1) input 1:
Thermocouple, RTD, Volt, mA
(2) input 2:
Current transformer (CT) for hea-
ting monitoring
(3) output 1: Heating or cooling (Relay, SSR, Volt, mA)
(4) output 2: Cooling (Relay, SSR, Volt, mA), DC Power supply.
(5) Alarm 1: Relay for differential, differential band, process, heating
interruption or sensor breakage
Alarm as normal, latching or latched alarm.
(6) Alarm 2: Relay for differential, differential band, process, heating
interruption or sensor breakage
Alarm as normal, latching or latched alarm.
(7) Heating time
(8) Heating interruption alarm
(9) Control circuit interruption alarm
(10) Sensor break alarm
(11) Error behaviour / reporting
(12) Bumpless Transfer
(13) PV1 Reverse offset
(14) Programmable SP1 range
(15) Heating-cooling control
(16) Hardware menu lock
(17) Automatic setting
(18) Self-optimisation
(19) ON-OFF, P, PD, PI, PID Regulation
(20) User defined menu (SEL)
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
If you do not need the following
functions, select the basic menu
range:
(1) second set point
(2) second PID
(3) Event input
(4) Remote setpoint (RAMP)
(5) Remote setpointt
(6) Complex process values
(7) Output limit
(8) Digital communication
(9) Analogue retransmission
(10) Sleep mode
(11) Digital Filter
(12) Pump control
(13) Remote lock
E-Mail: office@promesstec.com I Internet: www.promesstec.com
42
Advertisement
Table of Contents
