Installation; Before Mounting - promesstec UREG 200 User Manual

Range definition of A2SP
If A1FN=
Range of A1SP,
like Parameter
Range definition of SP2
If PVMD=
Range of ASP,
like Parameter
Exception: If A1SP, A2SP or SP2 are configured with reference to the CT input, the
setting range is unlimited.

5. Installation

Note:
To avoid possible material damage or damage to the unit, we strongly recommend
fitting a protective shutdown device (protective interrupter contact) that will cause the
unit to shut down when a preset condition is reached.

5.1 Before mounting

Check whether a completely assembled controller has been
delivered.
Inspect the controller for any damage that may have occurred
during transport. If such damage is present, inform the transport
company and supplier immediately.
Keep the packaging as it provides optimum protection during trans-
port. Make sure that the housing and the connection contacts are
not damaged.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
PV1.H, PV2.H,
PV1.L PV2.L
IN1 IN2
PV1 PV2
IN1 IN2
E-Mail: office@promesstec.com I Internet: www.promesstec.com
P1.2.H,
P1.2.L
D1.2.H,
D1.2.L
IN1, IN2
P1 - P2,
P2 - P1
IN1, IN2
24