Table of Contents
Advertisement
4.3 Programming interface & DIP switches
Programming port & DIP switch
The programming port can be used for offline programming and diagnostics. Do not
use this port during normal control operation.
When delivered, input 1 is preset for the connection of thermocouples or resistance
thermometers and all menu parameters are enabled.
12
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
Advertisement
Table of Contents
