Table of Contents
Advertisement
Warning!
A dangerous situation may possibly occur, which can lead to burns
due to hot surfaces or liquids if they are not avoided.
2. transport, packaging and storage
2.1 transport
Inspect the device for a damage that may have occurred during transport. Report
obvious damage immediately.
2.2 packaging
Do not remove the packaging until immediadtely before assembly. Keep the
packaging, because it provides optimal protection during transport (e.g. chageable
installation location, return).
2.3 storage
Avoid the following influences during longer storage:
- Direct sinlight or close to hot ojects
- Mechanical vibration, mechanical shock (hard set up)
- Soot, steam, dust and corrosive gases
If possible, store the device in the original packaging or appropriate packaging.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
6
Advertisement
Table of Contents
