Table of Contents
Advertisement
5.6 Connecting thermocouples
If possible, the sensor (see figure 2.5) should only be connected via the ther-
mocouple cable or a compensation cable. Avoid intermediate connections if possible.
Using the wrong type of cable will lead to inaccurate measurement results. Make
sure the polarity of the leads is correct and compare the terminal colours with the
thermocouple reference table.
TC connection
Thermocouples wire colours
28
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
Advertisement
Table of Contents
