Table of Contents
Advertisement
The menu lock can be used to restrict access to the parameters. Even when locked,
all parameters are displayed in the menu.
SEL1- SEL5 show the parameters enabled in quick access.
4.4 Buttons and display
The UREG200 controller is fully programmable via the front keys. The available key
functions can be found in the following table.
Key functions:
Key
Button HIGH
Button DOWN
Button BLANK
Enter button
for 3 sec.
for 6 sec.
Start recording
Scroll backwards
simultaneously
MODE
simultaneously
RESET
simultaneously
SLEEP Mode
for 3 sec.
Internal setup
simultaneously
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
Function
Pressing once increases the parameter value by one digit.
By holding down the parameter value is quickly increased.
Pressing once decreases the parameter value by one digit.
By holding down the parameter value is quickly decreased.
Pressing takes you to the next parameter.
Allows access to the "USER MENU", in various other
menus this confirms the entry or saves a value.
Deletes the stored process values PVHI and PVLO and
starts the new recording of the process limit values.
Pressing takes you to the previous parameter.
Press to select the operating mode.
Press to return to the operating display.
The controller goes into SLEEP mode, but this must be
enabled in the menu item SLEP.
This menu item is only available for maintenance work
by promesstec.
Incorrect settings can cause the controller to behave
incorrectly!
describtion
E-Mail: office@promesstec.com I Internet: www.promesstec.com
13
Advertisement
Table of Contents
