Ip Rating; The I-Pulz 2 Nerve Stimulator; General; Controls - Tens i-Pulz 2 User Manual

Only the manufacturer or distributor should do repairs or
upgrades to your i-Pulz 2. Never modify the device. Contact
your distributor for more information.
Information from the manufacturer and distributor can be found on the
back of this user manual.

IP rating

The i-Pulz 2 is classified with an ingress protection rating IP22. This
means that the device is protected from touch by fingers or similar
objects greater than 12,5 mm and is effective against condensation.
2

The i-Pulz 2 nerve stimulator

General

The i-Pulz 2 is a two-channel nerve stimulator. There is a channel
on the left- and right side of the device. Both channels work
independently from each other and do not influence each other – two
different forms of stimulation can, therefore, be used simultaneously. It
is also possible to use only one channel.
The i-Pulz 2 has 12 standard stimulation pre-sets (indicated by P1 to
P12). It is also possible to adapt user specific pre-sets (indicated by
P13 to P15) and to mask them (render invisible). The masking option is
to simplify the use of the device. The i-Pulz 2 will always start with the
last used pre-set and, if set, the last used timer-function as well.

Controls

I-Pulz 2 makes use of touch-technology. The buttons required to
control the device are at the front of the device. At the top is a physical
Power button to turn the device ON/OFF.
8 i-Pulz 2