The Display - Tens i-Pulz 2 User Manual

The display

A
B
C
F
A - Pre-set number / (remaining) time
The pre-set number will be displayed here. After setting the intensity,
the timer will countdown to 0 minutes (if activated). During the
treatment, it is possible to show the active pre-set or remaining time by
tapping on the pre-set or Timer button.
B – Keypad lock
If the buttons are not pressed after setting the intensity, the keypad
lock will activate after 15 seconds. This function prevents any
accidental increase in the intensity. The key-icon indicates that the lock
is active. The backlight will also dim when the lock is active. The key-
lock can be (de-)activated with the Power button.
C – Timer
When the clock-icon is visible, the timer is active.
D – Warning, check the user manual.
When this icon is displayed, please read the manual for further
instructions (see chapter 10).
E – Battery indicator
This icon indicates the capacity of the battery and is displayed in 5
steps (100%, 75%, 50%, 25%, <5%).
F – Intensity display left channel
The display shows the set intensity.
10
A – Pre-set number /
D
(remaining) time
B – Keypad lock
E
C – Timer
D – Warning, check the user
manual
E – Battery indicator
G
F – Intensity display left
channel
G – Intensity display right
H
channel
H – Graphics section
i-Pulz 2