Table of Contents
Advertisement
G – Intensity display right channel
The display shows the set intensity.
H – Graphics section
This section is used to clarify the pre-sets used. Every pre-set has a
graphic representation of the TENS waves being used. See chapter 4
for device options and other display menus.
Indication LED
The indication LED lights up during the charging-process or when an
error has occurred. See the section "Charging" or "Errors" for more
information.
Channels left and right
The channels are the outputs where the
cables for the electrodes can be connected.
The channel on the left side is the left channel,
the channel on the right side is the right
channel. When a channel is active, the socket
will light yellow. This indicates that a current is
fl owing through this channel to the electrodes.
Do not remove the cable or the electrode when active
as it could result in an electrical shock.
3
Starting the treatment
When using the device daily, these are the steps to follow:
• Cleansing of the skin
• Placing of the electrodes
• Setting up the stimulator
• Treatment active
• Stopping treatment
• Removing the electrodes
• Skincare
i-Pulz 2
11
Advertisement
Table of Contents
