Adjust Menu - Tens i-Pulz 2 User Manual

Timer step-size
The timer step-size is set to 10 minutes by default. This interval size
can be changed to 1, 5, 10, or 15 minutes with the left or right up-
buttons. By pressing on the Timer button you will be asked if this
change should be saved, before the device will go back to the settings
menu.
Mask pre-set
With this menu item, it is possible to mask or unmask every pre-set.
This option can be active to simplify the use of the device by hiding
unused pre-sets.
With the pre-set button, it is possible to step through the pre-sets, with
the left or right up-button it is possible to mask/unmask the pre-set.
If all pre-sets are masked, P1 will remain visible during normal
use.
By pressing on the Timer button you will be asked if this change
should be saved, before the device will go back to the settings menu.
Default settings
The device settings buzzer, timer step-size, and mask pre-set will be
set to factory default. Also, the user specified pre-sets will be cleared
to factory default.

Adjust menu

Pre-sets P13, P14, and P15 can be adapted for user specified pre-
sets. With these pre-sets, it is possible to combine the basic pre-sets
P1 – P9 or to customize the parameters of the basic pre-sets. In
default, these pre-sets are not activated. To activate these pre-sets go
the "mask pre-set" menu, so these pre-sets can be unmasked.
Configure a user specified pre-set only in consultation with the
treating specialist.
i-Pulz 2 17