Tens i-Pulz 2 User Manual page 34

Table 4. Recommended separation distance
Recommended separation distance between portable and mobile RF
communications equipment and the i-Pulz 2 (T1)
The i-Pulz 2 (T1) is intended for use in the electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of
the i-Pulz 2 (T1) can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile RF communications
equipment (transmitters) and the i-Pulz 2 (T1) as recommended below.
Rated
maximum
output power
of transmitter
in Watt
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated using
the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watt (W) according to the
transmitter manufacturer.
NOTE 1
NOTE 2
34
Separation distance according to frequency of transmitter
150 kHz - 80 MHz
d = 1,2 √P
0.12
0.38
1.2
3.8
12
At 80 MHz and 800 MHz, the separation distance for the
higher frequency range applies.
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
in meters
80 MHz - 800 MHz
d = 1,2 √P
0.12
0.38
1.2
3.8
12
800 MHz - 2,5 GHz
d = 2,4 √P
0.24
0.76
2.4
7.6
24
i-Pulz 2