Tens i-Pulz 2 User Manual page 33

NOTE 1
NOTE 2
a
b
i-Pulz 2
Guidance and Manufacturer's declaration -
electromagnetic emissions
At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Field strengths from fixed transmitters, such as base stations
for radio (cellular/cordless) telephones and land mobile
radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy.
To assess the electromagnetic environment due to fixed
RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location
in which the i-Pulz 2 (T1) is used exceeds the applicable
the applicable RF compliance level above, the i-Pulz 2 (T1)
should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be
necessary, such as re-orienting or relocating the i-Pulz 2 (T1).
Over the frequency range 150 kHz to 80 MHz, field strengths
should be less than 3 V/m.
33