Low And Rest Intensity; Compliance Menu - Tens i-Pulz 2 User Manual

Table of Contents

Advertisement

Low and rest intensity

When a basic pre-set P4 or P7 is selected as a user specifi ed pre-set,
you can set the separate intensity for the low-frequency period or the
rest period. Therefore, set the "low/rest intensity parameter" ON in the
adjust parameter menu.
When this pre-set is started, fi rst the desired
main intensity for the main frequency will be
set. After that, it is possible to set the intensity
for the lower or rest-period. To do this, press
on the intensity value at the screen. Now the
display changes like you can see in fi gure 6,
and it is possible to set the intensity of the lower
frequency or rest-period. This can be set 50%
higher or lower than the main frequency intensity.
Press on the screen at the intensity value again
to switch back to the normal screen.
When adjusting the main intensity level halfway the treatment, the low
or rest intensity-level will be reset to the same intensity as the main
intensity level.

Compliance menu

In the compliance menu, it is possible to see the usage of the device.
The pre-set, intensity, and time of each use will be stored in the device.
This information can be used by a medical specialist, doctor, caregiver
or parent to verify correct use according to the instructions.
When the device is ON, press the Power button and the Timer button
simultaneously to switch to the compliance menu. The compliance
menu can be exited with a short press on the Power button. The
device asks to clear the compliance menu and switch back to the
normal menu.
When the compliance is opened, it displays the following information.
The Session Number + date indicates when the treatment happened.
Of every treatment, it shows; the used pre-set number, the intensity,
and the time per channel (in minutes).
The date is based on the time set in the device. If the device-time is
inaccurate, it can give a misrepresentation of the date. See settings
menu - time to set the correct time in the device.
i-Pulz 2
Figure 6 set low / rest
intensity
19

Advertisement

Table of Contents
loading

Table of Contents