Tens i-Pulz 2 User Manual page 16

Cable tester
Connect the supplied cable(s) to the device without connecting the
electrodes. For both channels, the text "OPEN" will be displayed on
the screen. You can now test the cable by pressing the 2 mm pins
together. The text on the display will change from "OPEN" to "CLOSE"
on the side of the device where you are testing the cables, you will also
hear a beep. If this is not the case, and the text "OPEN" remains on the
screen, this indicates that the cable is defective and must be replaced.
Please contact your distributor for a new set of cables.
With the Timer button, it is possible to leave this item and go back to
the settings menu again.
Buzzer
This option allows you to switch the sound that is heard by each touch
input on or off, to give extra feedback when a button is "pressed".
With the left up-button, the sound will be turned off, with the right up-
button, the sound will be turned on. By pressing on the Timer button,
you will be asked if this change should be saved, before the device
goes back to the settings menu.
Time
The device stores the actual time, which
Settings menu
will be used for the compliance function. If
the time or date is not accurate, the other
functions of the device will still work correctly.
Time
When you open this menu, the current
overview
time and date will be displayed in the time-
overview. To change the time or date,
Hours
press the pre-set button to step through
the available values. With each value, is it
Minutes
possible to decrease the value with the left
up-button and increase the value with the
Year
right up-button.
By pressing the Timer button, it will switch
Month
back to the time-overview.
When pressing on the Timer button in the
Day
time-overview you will be asked if this change
should be saved, before the device will go
back to the settings menu.
16 i-Pulz 2