Table of Contents
Advertisement
Irritated skin
If any skin irritation appears when using the nerve stimulation
treatments, this can be caused by too prolonged use, or by electrodes
with a too small surface area. Make sure the electrodes are suitable for
the required treatment, especially when using adjusted pre-sets.
If you experience persistent irritation of your skin or burns when using
the i-Pulz 2, to prevent possible burns, please contact your treating
specialist.
Intensity value
0 – 55 mA
55 – 70 mA
70 – 100 mA
11
Important information regarding EMC
General
Electronic devices such as portable and mobile RF-communication
devices and medical devices can be sensitive for electromagnetic
interference of similar devices. This malfunction may lead to
malfunctioning of the medical device, causing a potentially unsafe
situation. The (medical) device itself may not cause interference with
other devices.
Keeping an eye on the requirements to regulate EMC with the purpose
of preventing unsafe product situations, the EN60601-1-2 norm has
been implemented. This standard defines the rate of immunity for
electromagnetic interferences and the maximum electromagnetic
radiations for medical equipment.
The i-Pulz 2 is manufactured by Rehan Electronics Ltd and adheres to
the EN60601-1-2 norm, for both immunity and emission.
i-Pulz 2
Minimal Electrode size
8cm²
2.9 × 2.9cm
10cm²
3.2 × 3.2cm
15cm²
3.9 × 3.9cm
Ø3.2cm
Ø3.6cm
Ø4.4cm
29
Advertisement
Table of Contents
