Tens i-Pulz 2 User Manual page 18

To create a user specifi ed pre-set, turn ON the
device and select P13, P14, or P15 to confi gure.
Press the Power button and the pre-set button
together to switch to the Adjust menu. (make
sure the intensity is 0.0 mA)
To switch back to the normal menu, press shortly
on the Power button again. The device will ask to
save the adjustments.
In the adjust menu, it is possible to select one
of the basic pre-sets for the right channel and
another basic pre-sets for the left channel.
Pre-set P10 can't be combined with other pre-
sets.
With the Left Up/Down button, you can select P1 till P10 for the Left
channel. And the Right Up/Down button for the Right channel. See
Figure 3 adjust menu".
To customize the parameters of these basic pre-
sets, press on the pre-set button. First, you can
adjust the parameters of the Left channel.
Depending on which basic program is selected,
various parameters can be changed. See the
section Pre-set overview.
• Use the Timer button to step through these various parameters.
• Use the Left Up/Down buttons to adjust the value of the parameter.
When the parameters for the Left channel are
set, press the pre-set button to switch to the
parameters for the Right channel.
• Use the Timer button to step through the
various parameters.
• Use the Right Up/Down button to adjust the
value of the parameter.
By pressing the pre-set button again, the adjust menu will start over
again, and you can select the basic pre-sets again.
18
Figure 3 adjust menu
i-Pulz 2