Load Subsystem - Chroma 62000D Series Operating And Programming Manual

Return Parameter:
Query Example:
Return Example:
Note The output must be OFF for setting.
5.6.2.4

LOAD Subsystem

1. LOAD: CURRent
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter:
Query Example:
Return Example:
2. LOAD:CURRent:PROTect:HIGH
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter:
Query Example:
Return Example:
3. LOAD:POWer
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter:
Query Example:
Return Example:
4. LOAD:POWer:PROTect:HIGH
Description:
Syntax:
SOUR:DCON:FALL? [{MAX/MIN}]
<NRf+> [Unit=Watt]
SOUR:DCON:RISE?
7.950000e+01
Sets the Load output current (ampere).
LOAD:CURRent <NRf+>[ suffix]
Refer to individual spec for valid numeric range.
LOAD:CURR 1
LOAD:CURR 60.00
LOAD:CURR? [{MAX/MIN}]
<NRf+> [Unit=Amp]
LOAD:CURR?
LOAD:CURR? MAX
1.000000e+00
Sets the current range for Load over current protection.
LOAD:CURRent:PROTect:HIGH <NRf+>[ suffix]
Refer to individual spec for valid numeric range.
LOAD:CURR:PROT:HIGH 60.0
LOAD:CURR:PROT:HIGH? [{MAX/MIN}]
<NRf+> [Unit=Amp]
LOAD:CURR:PROT:HIGH?
LOAD:CURR:PROT:HIGH? MAX
6.000000e+01
Sets the Load power output (watt).
LOAD:POWer <NRf+>[ suffix]
Refer to individual spec for valid numeric range.
LOAD:POW 1
LOAD:POW 60.00
LOAD:POW? [{MAX/MIN}]
<NRf+> [Unit=Watt]
LOAD:POW?
LOAD:POW? MAX
set.
1.000000e+00
Sets the power range for Load over power protection.
LOAD:POWer:PROTect:HIGH < NRf+>[ suffix]
It returns the setting.
It sets the output current to 1 amps.
It sets the output current to 60.00 amps.
It returns the current.
It returns the max. current can be set.
It sets the high limit to 60A
for current output protection.
It returns the high limit of
current protection.
It returns the max. over
current protection..
It sets the output power to 1 watt.
It sets the output power to 60 watt.
It returns the power
It returns the max. power can be
Remote Operation
5-21