Factory Setup - Chroma 62000D Series Operating And Programming Manual

Programmable Bidirectional DC Power Supply 62000D Series
Operating and Programming Manual
3.2.3.2

Factory Setup

This function lets you to reset the DC power supply to its factory default settings.
In Menu page, tap "System Setup" and select "Factory Default", the screen appears as
1.
Figure 3-16 shows.
2. Tap Recall Factory Default. A warning message will prompt as Figure 3-17 shows. It will
remain the last configuration settings saved by you if No is selected, and return all
configurations to the factory default if Yes is selected.
3-12
Figure 3-15
Figure 3-16