Command Reference - Sierra Wireless AirPrime XS1110 Command Reference Manual

AirPrime XS1110 AT Command Reference
Table 5-2: System Commands (Detail)
Command
AT+GNSSFER
AT+GNSSFSN
AT+GNSSVERS
Rev 3.1 Jul.20

Command reference

Description
Erase the currently saved firmware
Usage:
•
Exec: AT+GNSSFER
Response: +GNSSFER,OK
or +GNSSFER,<error code>
Example:
•
Erase the current firmware:
AT+GNSSFER<CR><LF>
+GNSSFER,OK*59<CR><LF>
Acquire the serial number of the GNSS module
Usage:
•
Read: AT+GNSSFSN?
Response: +GNSSFSN,<fsn>,OK
or +GNSSFSN<error code>
Parameters:
<fsn> (Serial number)
Example:
•
Read the serial number of the module:
AT+GNSSFSN?<CR><LF>
+GNSSFSN,03891419444620,OK*59<CR><LF>
Acquire the SWIR-defined firmware version
Usage:
•
Read:
AT+GNSSVERS?
Response: +GNSSVERS,<ver>,OK
or +GNSSVERS,<error code>
Parameters:
<ver> (Firmware version)
Example:
•
Read the SWIR-defined firmware version:
AT+GNSSVERS?<CR><LF>
+GNSSVERS,SWI5605XS_RC16.1_FDLS.19017,OK*5B<CR><LF>
42 41113737