Sierra Wireless AirPrime XS1110 Command Reference Manual page 16

AirPrime XS1110 AT Command Reference
Table 2-2: General Commands (Detail) (Continued)
Command
AT+GNSSUMODE
Rev 3.1 Jul.20
Description
Configure and query navigation algorithm to fit different scenarios
Usage:
•
Write: AT+GNSSUMODE=<mode>
Response: +GNSSUMODE,<mode>,OK
or +GNSSUMODE,<error code>
Purpose: Set the specific navigation mode.
•
Read: AT+GNSSUMODE?
Response: +GNSSUMODE,<mode>,OK
or +GNSSUMODE,<error code>
Purpose: Read the navigation mode configuration.
Parameters:
<mode> (Navigation mode)
•
0—Fitness mode (default) is used for low velocity (speed < 25 km/hr) activities such as
running or walking.
•
1—Swimming mode is used for swimming activities.
•
2—Driving mode is used for high velocity (speed > 25 km/hr) activities such as driving or
riding motorcycles.
Examples:
•
Set module to fitness mode:
AT+GNSSUMODE=0<CR><LF>
+GNSSUMODE,0,OK*6B<CR><LF>
•
Read configuration mode:
AT+GNSSUMODE?<CR><LF>
+GNSSUMODE,0,OK*6B<CR><LF>
16 41113737