Sierra Wireless AirPrime XS1110 Command Reference Manual page 12

AirPrime XS1110 AT Command Reference
Table 2-2: General Commands (Detail)
Command
AT+GNSSSTOP
AT+GNSSSTART
Rev 3.1 Jul.20
Command reference
Description
Stop positioning and enter standby states
Usage:
•
Execute: AT+GNSSSTOP
Response: +GNSSSTOP,OK
or +GNSSSTOP,<error code>
Purpose: Configure module into standby mode.
Examples:
•
Stop positioning:
AT+GNSSSTOP<CR><LF>
+GNSSSTOP,OK*39<CR><LF>
Execute GNSS startup process
Usage:
•
Write: AT+GNSSSTART=<mode>
Response: AT+GNSSSTART=<mode>,OK
or +GNSSSTART,<error code>
Purpose: Configure module to restart by specified mode.
Parameters:
<mode> (Restart mode)
•
0—Cold Start
•
1—Warm Start
•
2—Hot Start
Examples:
•
Cold Start:
AT+GNSSSTART=0<CR><LF>
+GNSSSTART,0,OK*7D<CR><LF>
•
Hot Start:
AT+GNSSSTART=2<CR><LF>
+GNSSSTART,2,OK*7F<CR><LF>
12 41113737