Sierra Wireless AirPrime XS1110 Command Reference Manual page 17

Table 2-2: General Commands (Detail) (Continued)
Command
AT+GNSSUTC
Rev 3.1 Jul.20
Description
Acquire current UTC Time
Note: You must receive the full ephemeris before you can get the valid data.
Usage:
•
AT+GNSSUTC?
Read:
Response: +GNSSUTC,<year>,<month>,<day>,<hour>,<min>,<sec>.<usec>,OK
or +GNSSUTC,<error code>
Purpose: Get UTC time from module.
Parameters:
<year> (UTC Year)
•
Range: 1980-2099
<month> (UTC Month)
•
Range: 1-12
<day> (UTC Day)
•
Range: 1-31
<hour> (UTC Hour)
•
Range: 0-23
<min> (UTC Minute)
•
Range: 0-59
<sec> (UTC Second)
•
Range: 0-59
<usec> (UTC Microsecond)
•
Range: 0-999999
Note: The starting UTC time is from 1980.1.6 0:0:0.00.
UTC format: yyyy,mm,dd,hh,mm.ffffff (Year,Month,Day,Hour,Minute,Second.Microsecond)
Examples:
•
Acquire GNSS UTC Time:
AT+GNSSUTC?<CR><LF>
+GNSSUTC,2013,07,02,03,38,07.221606,OK*46<CR><LF>
17
General Commands
41113737