Sierra Wireless AirPrime XS1110 Command Reference Manual page 44

AirPrime XS1110 AT Command Reference
Table 5-2: System Commands (Detail) (Continued)
Command
AT+GNSSTCXO
AT+GNSSREBOOT
AT+GNSSSTACK
Rev 3.1 Jul.20
Description
Acquire TCXO offset value
Usage:
•
Read: AT+GNSSTCXO?
Response: +GNSSTCXO,<TCXO>,OK
or +GNSSTCXO,<error code>
Purpose: Get TCXO offset.
Parameters:
<TCXO> (TCXO offset)
•
Unit is in Hz.
Example:
•
Read the TCXO value:
AT+GNSSTCXO?<CR><LF>
+GNSSTCXO,-292,OK*19<CR><LF>
Reboot module
Usage:
•
AT+GNSSREBOOT
Exec:
Response: +GNSSREBOOT,OK
or + GNSSREBOOT,<error code>
Purpose: Reboot module.
Example:
•
Reboot module:
AT+GNSSREBOOT<CR><LF>
+GNSSREBOOT,OK*19<CR><LF>
Note: This AT command erases all of the RAM data.
Get a size of unused stack
Usage:
•
AT+GNSSSTACK?
Read:
Response: +GNSSSTACK,<size>,OK
or +GNSSSTACK,<error code>
Purpose: Get a size of unused stack.
Parameters:
<size> (Unused stack size)
•
Unit: byte
Example:
•
Get a size of unused stack:
AT+GNSSSTACK?<CR><LF>
+GNSSSTACK,256,OK*19<CR><LF>
44 41113737