Sierra Wireless AirPrime XS1110 Command Reference Manual page 39

Table 4-2: AGNSS Commands (Detail) (Continued)
Command
Rev 3.1 Jul.20
Description
Parameters:
<action>
•
0—Disable LLE function.
•
1—Enable LLE function.
•
2—Erase LLE data in flash.
•
3—Set LLE data saved into flash.
•
4—Check the integrity of the injected LLE data in flash.
<packet_num> (Packet number)
<lle_satellite_xxx>
•
xxx:
•
0—GPS
•
1—QZSS
•
2—GLN
•
3—GAL
•
4—BDS
<age_xxx> (Life of the saved LLE data of the xxx satellite system)
•
Availability: 3 days, 7 days, or 14 days
•
xxx:
•
GLN—GLONASS
•
GAL—Galileo
•
BDS—BeiDou
<start_time_xxx> (start time of the LLE data of the xxx satellite system)
•
Format: YYYYMMDD (YearMonthDay)
<packet_size> (Single packet size)
<lle_select>
•
0— LLE function is disable
•
1— LLE function is enable
Example:
•
Enable LLE function:
AT+GNSSLLE=1<CR><LF>
+GNSSLLE,1,OK*69<CR><LF>
•
Write configuration for setting LLE data to flash.
AT+GNSSLLE=3,0<CR><LF>
+GNSSLLE,0,CONNECT*22<CR><LF>
.(Inject LLE data)
.
.
+++ (exit data mode)
+GNSSLLE,0,2048,OK*5A<CR><LF>
•
Read the configuration of LLE.
AT+GNSSLLE?<CR><LF>
+GNSSLLE,0,0,3,20200325,1,0,00000,2,0,00000,3,0,00000,4,0,00000,OK*57
<CR><LF>
39
AGNSS Commands
41113737