AirPrime XS1110 AT Command Reference
Table 4-2: AGNSS Commands (Detail) (Continued)
Command
AT+GNSSSGE
Rev 3.1 Jul.20
Description
Enable / disable autonomous AGNSS function and acquire the status
Usage:
•
Write:
AT+GNSSSGE=<action>
Response:
+GNSSSGE,<action>,OK
or
+GNSSSGE,<error code>
Purpose:
Configure SGE function.
•
Read:
AT+GNSSSGE?
Response:
+GNSSSGE,<action>,<satellite A>,<satellite B>,OK
or
+GNSSSGE,<error code>
Purpose:
Acquire the status when the satellite already have AGNSS data, waiting for
ephemeris.
Parameters:
<action> (Status of auto-GPS)
•
0—Disable (Default)
•
1—Enable
•
2—Erase
<satellite A> (Satellite have already generated AGNSS data)
•
Value: AAAAAAAA
•
Bit 0: SV1
•
Bit 2: SV2
•
Bit 31: SV32
<satellite B> (Satellite waiting for the ephemeris to generate AGNSS data)
•
Value: BBBBBBBB
•
Bit 0: SV1
•
Bit 1: SV2
•
Bit 31: SV32
Note: The SGE function is only needed to capture the 12.5-minute ephemeris data from the
satellite. It automatically calculates and predicts using GNSS without a 24-hour or 72-hour waiting
period.
Example:
•
Enable auto AGNSS:
AT+GNSSSGE=1<CR><LF>
+GNSSSGE,1,OK*6E<CR><LF>
•
Acquire auto AGNSS state:
AT+GNSSSGE? <CR><LF>
+ GNSSSGE,1,00000000,677381157,OK*1F<CR><LF>
40
41113737