5-Amp Power Supply Cabling; Switching The Device On And Off; Figure 6-18: Cabling Power With 5A Ac/Dc Power Adapter - AudioCodes i Series Hardware Installation Manual

6.7.2

5-Amp Power Supply Cabling

For 5-Amp power supply, the device is shipped with an AC/DC power adapter that supplies
5 amps. The adapter provides an integrated DC power cord with a DC plug for attaching to
the device. For the connection to the standard AC electrical wall outlet, an AC power cord
with a female, 2-prong plug (C2) on one side for connecting to the AC/DC adapter and a plug
on the other end for connecting to electrical wall outlet
 To connect the device to the power supply using the 5-Amp power adapter:
1.
Connect the DC plug at the end of the DC power cord to the device's power socket,
located on the rear panel.
2.
Connect the 2-prong plug at one end of the AC power cord to the power adapter.

Figure 6-18: Cabling Power with 5A AC/DC Power Adapter

3.
Connect the plug at the other end of the AC power cord to a standard electrical outlet.
6.7.3

Switching the Device On and Off

The device is equipped with a power switch, which is located on its rear panel (see Section
3.3 on page 16) for turning it on or off.

To power on the device:
Press in the power button; the device receives power, indicated by the lighting of the

Power LED, located on the front panel.

To power off the device:
Press out the power button; the device powers off, indicated by the Power LED going

off.
Hardware Installation Manual 46
Mediant 500Li
Document #: LTRT-10605