Figure 4-3: Positioning Device's Anti-Slide Rubber Legs Into Shelf's Openings; Figure 4-4: Device Mounted On Shelf In 19-Inch Rack - AudioCodes i Series Hardware Installation Manual

Hardware Installation Manual
3. Place the device on the shelf so that the device's front panel faces the front of the rack
and the device's four anti-slide rubber legs (located on the bottom of the device) fit into
the four square openings on the shelf, as shown in the figure below (viewed from
underneath):

Figure 4-3: Positioning Device's Anti-Slide Rubber Legs into Shelf's Openings

4. Make sure the device is firmly mounted on the shelf so it does not horizontally slide in
any direction:
Mediant i-Series

Figure 4-4: Device Mounted on Shelf in 19-inch Rack

21
4. Mounting the Device
Mediant 500Li