Table of Contents
Advertisement
Hardware Installation Manual
3.
Attach the two cellular antennas (supplied) to the antenna connectors, located on the
rear panel, by hand screwing the antennas onto the connectors. Make sure that the
antennas are securely fastened to the connectors.
Note:
•
You must attach both antennas for LTE connectivity.
The exact location of the second antenna post that is located to the right of the far-
•
left antenna post, depends on the ordered hardware configuration. For
convenience, the figure above shows the two possible locations of the second
antenna post.
4.
Orient the antennas as desired for optimal reception with the LTE network. The antennas
can be orientated in the vertical and horizontal planes. For best performance, it is
recommended that the antennas be perpendicular (90 degrees) to the floor. In other
words, orient the antennas straight up.
5.
Mount the device in a location that receives the best LTE connection (signal).
Mediant i-Series
Figure 6-7: Connecting Cellular Antennas
35
6. Cabling the Device
Mediant 500Li
Advertisement
Table of Contents
